The AIRAID 250-609 POWERAID throttle body spacer comes with all the mounting hardware you'll need | Back in 1969, you could buy an entry level Chevy Camaro SS for $3,023 ($19,911 in today's money), and it would be equipped with a 350 ci V8 that made a staggering 300-hp. That was a lot of pony power back then, and it could propel this 3,400 lb Mustang-fighter to 60 mph in just 6.8 ticks. Fast forward nearly 50 years and the 2016 Chevrolet Camaro can be equipped with a 335-hp 3.6L V6, and galloping to 60 mph takes just 5.1 seconds. No matter how you look at it, that's an incredible advancement. The all-new 6th generation 2016 Camaro V6 also gets considerably more miles-to-the-gallon than the 1969's 10 mpg, and the optional dual-mode exhaust system can really make this brute sing. But if you want to increase your torque between 800-3,000 RPM, then you're going to need an AIRAID 250-609 POWERAID throttle body spacer.The 3.6L V6 in your 2016 Chevy Camaro uses a wide range of cutting edge technology to squeeze V8 power from just 6 cylinders. One of these hi-tech power extractors is the direct injection system, which sprays a precise mist of fuel into each cylinder so it can mix with the air more thoroughly before detonation (known as atomization). This potent air/fuel mixture creates a stronger detonation, which results in more power. If you want to increase the effectiveness of the Chevy direct injection system, you need to increase the velocity of the air going into the cylinders. That way the oxygen molecules will become more evenly distributed, which increases their ability to blend with the fuel molecules. To do this, the AIRAID 250-609 throttle body spacer has a special 'helix bore' that causes the air to spin as it exits the intake tube. This causes the air to swirl around inside the cylinder, creating a sort of vortex that sucks in the fuel mist, mixing the two together more completely. 
A 250-609 POWERAID throttle body spacer installed on a 2016 Chevrolet Camaro 3.6L V6 | Think of it this way, if you squirt chocolate syrup into a glass of milk while you stir it, you're going to create a much richer glass of chocolate milk, than if you just dumped in the chocolate and tried to smush out all the lumps. Translate that into a fuel/air mixture, and the richer blend will create a hotter detonation, which pushes the cylinder down with more force, turning the crankshaft and ultimately the wheels. This additional torque will be available lower in the rev-band and less throttle input will be needed to reach it. So from 800-3,000 RPM, the 250-609 POWERAID throttle body spacer will give your 2016 Camaro V6 much sharper throttle response, and it'll accelerate faster from a stop and on part-throttle. Plus, it takes less than an hour to install, and it's backed by the AIRAID No-Hassle Lifetime Warranty.Proudly Made in the U.S.A., just like your Camaro, the AIRAID POWERAID 250-609 throttle body spacer is CNC machined from a billet of aircraft-grade 6061-T6 aluminum, and features an attractive red anodized finish. The proprietary helix bore was engineered for the specific airflow requirements of the 2016 Camaro 3.6L V6, and it can be installed with no under-hood modifications. The AIRAID 250-609 is designed to fit the following vehicles: 2016 CHEVROLET CAMARO 3.6L V6 Fuel Injection - All Models
|
